跳到主要內容區
EN
:::


:::
  1. 首頁
  2. 陳校長
  3. 期刊論文
  1. Ming-Fei Chen, Cheng-Wen  Chen, Chun-Jung  Su, Wei-Lun Huang , Wen-Tse Hsia , “Identification of the scraping quality for the machine tool using the smartphone”,The International Journal of Advanced Manufacturing Technology volume 105 (2019), pp. 3451–3461.(SCI)
  2. Ming-Fei Chen, Pei-Hao Wang, Wen-Tse Hsiao, “Aerostatic moving stage positioning compensation using a numerical algorithm combined with an image acquisition method”, International Journal of Advanced Manufacturing Technology 104 (2019), pp. 1203-1210. (SCI)
  3. Dyi Cheng Chen, Ming Fei Chen, Chih Hsuan Pan, Jun Yan Pan , “Study of membrane restrictors in hydrostatic bearing”, Advances in Mechanical Engineering(2018)(SCI)
  4. Ming-Fei Chen, Wen-Tse Hsiao, Ming-Cheng Wang, Ying-Fang Chen, Chi-Min Lo, "Theoretical analysis and experimental verification of AZO/i-ZnO/CdS/CIGS multilayer stack isolation using 1064 nm and 355 nm laser wavelengths", Optical and Quantum Electronics, 49(2), (2017), pp.1-15. (SCI)
  5. Ming-Fei Chen, Wen-Tse Hsiao, Ming-Cheng Wang, Kai-Yu Yang, Ying-Fang Chen, “Multi-performance characterization analysis of hole diameter and taper angle in pulsed UV laser percussion via of alumina ceramics”, Optical and Quantum Electronics 49, (2017), pp.383. (SCI)
  6. Dyi-Cheng Chen, Ming-Fei Chen, Jing Hao Kang, Chia Chun Lai , “Vibration characteristics and modal analysis of a grinding machine” , Journal of Vibroengineering(2017) (SCI)
  7. Wen-Tse Hsiao, Chih-Chung Yang, Kuo-Cheng Huang, Chien-Kai Chung, Shih-Feng Tseng, Donyau Chiang, Ming-Fei Chen, "Optical glass substrates forming processes using pulsed ultraviolet laser micromilling technology", Journal of Laser Micro / Nanoengineering, 11, (2016), pp.30-34. (SCI)
  8. Wen-Tse Hsiao, Chih-Chung Yang, Shih-Feng Tseng, Donyau Chiang, Kuo-Cheng Huang, Keh-Moh Lin, Ming-Fei Chen, "Surface modification nanoporous titanium oxide films using continuous wave CO2 laser", Applied Physics A: Materials Science & Processing, 122, (2016), pp. 381-388. (SCI).
  9. Ming-Fei Chen, Wen-Tse Hsiao, Ming-Cheng Wang, Ying-Fang Chen, "Isolation scribing on hybrid films for CIGS-based solar cell using various nanosecond pulsed laser wavelengths", Journal of Laser Micro / Nanoengineering, 11, (2016), pp.239-245. (SCI)
  10. Wen-Tse Hsiao, Shih-Feng Tseng, Chien-Kai Chung, Donyau Chiang, Kuo-Cheng Huang, Keh-Moh Lin, Liang-Yan Li, Ming-Fei Chen, "Effect on structural, optical and electrical properties of aluminum-doped zinc oxide films using diode laser annealing", Optics and Laser Technology, 68 (2015), pp. 41-47. (SCI)
  11. Ming-Fei Chen, Wen-Tse Hsiao, Ming-Cheng Wang, Kai-Yu Yang, Ying-Fang Chen, "A theoretical analysis and experimental verification of a Laser drilling process for a ceramic substrate", International Journal of Advanced Manufacturing Technology, 81, (2015), pp.1723-1732. (SCI)
  12. Shih-Feng Tseng, Ming-Fei Chen, Wen-Tse Hsiao, Chien-Yao Huang, Chung-Heng Yang, Yu-Sheng Chen, "Laser micromilling of convex microfluidic channels onto glassy carbon for glass molding dies",  Optics and Lasers in Engineering 57 (2014), pp. 58-63. (SCI)
  13. Chien Kai Chung, Wen Tse Hsaio, Shih Feng Tseng, Kuo Cheng Huang, Ming Fei Chen, "Effect of optical properties characteristic polymethylmethacrylate using UV laser direct-structuring", Advanced Materials Research 939 (2014), pp. 230-236. (EI)
  14. Ming-Fei Chen, Dyi-Cheng Chen, Chung Heng Yang, Shih Feng Tseng , “The identification of nonlinear systems using C(t) - K (t) plane coordinates” , Mathematical Problems in Engineering(2014) (SCI)
  15. Dyi-Cheng Chen, Ming-Fei Chen, Ming Ren Chen , “Thermal Effect on a CIGS Thin-Film Solar Cell P2 Layer by Using a UV Laser” , Advances in Mechanical Engineering(2014) (SCI)
  16. Wen-Tse Hsiao, Shih-Feng Tseng, Kuo-Cheng, Donyau Chiang, Ming-Fei Chen, "Microhole machining of silicon wafer in air and under deionized water by pulsed UV laser system", Applied Physics A: Materials Science & Processing 110(3) (2013), pp. 565-570 (SCI) 10.1007/s00339-012-7128-7
  17. Wen-Tse Hsiao, Shih-Feng Tseng, Chien-Kai Chung, Pin-Hung Chen, Ming-Fei Chen, " Development of portable laser machining system for laser writing applications", Optical Review 20(2) (2013), pp.167-172. (SCI)
  18. Shih-Feng Tseng, Wen-Tse Hsiao, Ming-Fei Chen, " The development of a portable line-shaping optical system for silicon surface treatment ", Optical Review 20(2) (2013), pp.163-166. (SCI)
  19. Chia Ting Hsieh, Yu Feng Hsu, Chia Wei Chung, Ming-Fei Chen, Wei-Chia Su, Chi-Yen Huang , “Distortion aberration correction device fabricated with liquid crystal lens array” , Optics Express(2013), pp. 1937-1943 . (SCI)
  20. Chin-Chia Liu, Ming-Fei Chen , “The vibration problem studying in micro actuator system using the differential transformation method” , Innovation for Applied Science and Technology(2013) , pp. 1966-1970. (SCI)
  21. Wen-Tse Hsiao, Shih-Feng Tseng, Donyau Chiang, Kuo-Cheng Huang, Ming-Fei Chen, Chang-Pin Chou, "Edge isolation of transparent conductive polymer (TCP) films on a flexible substrate using UV laser ablation", Journal of Nanoscience and Nanotechnology 12 (2012), pp.4905-4910. (SCI)
  22. Chia Hao Kuo, Wei Che Chien, Chia Ting Hsieh, Chi-Yen Huang, Jyun Jie Jiang, Yan Cheng Li, Ming-Fei Chen, Yi Ping Hsieh, Hui Lung Kuo, Chi Huang Lin , “Influence of pretilt angle on disclination lines of liquid crystal lens” , Applied Optics(2012) , pp. 4269-4274. (SCI)
  23. Ming-Fei Chen, Keh Moh Lin, Yu Sen Ho , “Laser annealing process of ITO thin films using beam shaping technology” , Optics and Lasers in Engineering(2012) , pp. 491-495. (SCI)
  24. Ming-Fei Chen, Keh-moh Lin, Yu-Sen Ho, "Laser annealing process of ITO thin films using beam shaping technology",Optics and Lasers in Engineering, Vol. 50  No.3  pp.491-495, 2011. (SCI)
  25. Ming-Fei Chen, Wei-Lun Huang, "Study on the Aerodynamic Effect and Misalignment Influence of Journal Gas Bearing for High Speed Electro-spindle",Journal of the Chinese Society of Mechanical Engineers, Vol. 32  No.4  pp.341-348, 2011. (SCI)
  26. Ming-Fei Chen, Wei-Lun Huang, "Research on Reverse Engineering for Rotor-Bearing Systems Using The Finite Element Method",Journal of the Chinese Society of Mechanical Engineers, 2011. (SCI)
  27. Ming-Fei Chen, Wei-Lun Huang, "Investigation into the Finite Element Modeling and Dynamic Characteristics of the Assembly of Spindle and Motor Rotor",Journal of the Chinese Society of Mechanical Engineers, Vol. 32  No.3  pp.257-266, 2011. (SCI)
  28. Ming-Fei Chen, Yu-Sen Ho, Wei-Lun Huang, Shen-Mao Wang, "Examination of the Developed Scanning System for RGB Laser Projector with a Feedback Control",Optical Review ,Vol. 18, No. 1 (2011) 128–131, 2011. (SCI)
  29. Ming-Fei Chen, Keh-moh Lin, Yu-Sen Ho, "Effects of Laser-induced Recovery Process on Conductive Property of SnO2F Thin Films",Materials Science and Engineering B,Vol. 176 (2011) 127–131, 2011. (SCI)
  30. Ming-Fei Chen, Yu-Sen Ho, Wen-Tse Hsiao, Tse-Hung Wu, Shih-Feng Tseng, Kuo-Cheng Huang, "Optimized laser cutting on light guide plates using grey relational analysis", Optics and Lasers in Engineering,Vol. 49, Issue 2, pp. 222-228., 2011. (SCI)
  31. Wen-Tse Hsiao, Shih-Feng Tseng, Kuo-Cheng Huang, Yan-Hsin Wang, Ming-Fei Chen, "Pulsed Nd:YAG laser treatment of monocrystalline silicon substrate",International Journal of Advanced Manufacturing Technology, Vol. 56  NO.1-4  pp.233-231, 2011. (SCI)
  32. Shih-Feng Tseng, Wen-Tse Hsiao, Kuo-Cheng Huang, Donyau Chiang, Ming-Fei Chen, Chang-Pin Chou, "Edge isolation of transparent conductive polymer (TCP) thin films on flexible substrates using UV laser ablation",Journal of Nanoscience and Nanotechnology, 2011. (SCI)
  33. Shih-Feng Tseng, Kuo-Cheng Huang, Donyau Chiang, Ming-Fei Chen, Sheng-Yi Hsiao, Yung-Sheng Lin, Chang-Pin Chou, "Hydrophobic templates with rough patterns fabricated by laser micromachining for liquid droplets generation",Advanced Materials Research, Vols.264-265  pp.1234-1239, 2011. (EI)
  34. Shih-Feng Tseng,Wen-Tse Hsiao, Kuo-Cheng Huang, Ming-Fei Chen, Chao-Te Lee, Chang-Pin Chou,”Laser scribing of indium tin oxide (ITO) thin films deposited on various substrates for touch panels”, Applied Surface Science, Vol. 257, Issue 5, pp. 1487-1494.2010(SCI)
  35. Shih-Feng Tseng,Wen-Tse Hsiao, Kuo-Cheng Huang, Ming-Fei Chen, Chao-Te Lee, Chang-Pin Chou, “Characteristics of Ni–Ir and Pt–Ir hard coatings surface treated by pulsed Nd:YAG laser”, Surface & Coatings Technology, Vol. 205, Issue 7, pp. 1979-1984.2010.(SCI)
  36. Ming-Fei Chen, Wei-Lun Huang, Yu-Pin Chen, "Surface wettability of silicon substrates enhanced by laser ablation", Applied Physics A: Materials Science & Processing, vol. 101, pp. 303–308.2010. (SCI)
  37. Ming-Fei Chen, Wei-Lun Huang, G.A. Chen, "Stability Analysis of Opposed-Pad Annular Aerostatic Thrust Bearings for High Speed Electro-Spindle", Journal of the Chinese Society of Mechanical Engineers,Vol. 31, No.4(2010), pp.289~296. 2010. (SCI)
  38. Ming-Fei Chen, Wei-Lun Huang, Yu-Pin Chen, "Design of the Aerostatic Linear Guideway with a Passive Disk-Spring Compensator for PCB Drilling Machine", Tribology International, Vol.43, pp.395-403., 2010. (SCI)
  39. Wei-Li Chen, Yan-Hsin Wang, Ming-Fei Chen, Man-Fang Huang, Jenn-Chyuan Fan , "Defect structure study of epitaxial InN films by transmission electron microscopy and X-ray diffraction", Physica E: Low-dimensional Systems and Nanostructures, Volume 42, Issue 5, March 2010, Pages 1463-1468. , 2010. (SCI)
  40. Ming-Fei Chen, Yu-Sen Ho, Shen-Mao Wang, “A Fast Positioning Method with Pattern Tracking for Automatic Wafer Alignment”, Image and Signal Processing, 2010. CISP '10. 3rd International Congress on, pp.1594-1598.2010.(EI)
  41. Ming-Fei Chen, Wei-Lun Huang, "Dynamic Behaviors Analysis of the Aerostatic Linear Guideway with a Passive Compensator for PCB Drilling Machine", Journal of the Chinese Society of Mechanical Engineers,Vol. 30, pp.115-123. 2009. (SCI)
  42. Ming-Fei Chen, Yu-Pin Chen,Wen-Tse Hsiao, "Correction of Field Distortion of Laser Marking Systems using Surface Compensation Function", Optics and Lasers in Engineering, Vol. 47, pp. 84-89, 2009. (SCI)
  43. Ming-Fei Chen, Yan-Hsin Wang, Wen-Tse Hsiao, "Finite element analysis and verification of laser marking on eggshell", Journal of Materials Processing Technology, Vol. 209, pp. 470-476, 2009. (SCI)
  44. Ming-Fei Chen, Wen-Tse Hsiao, Wei-Lun Huang and Chun-Wei Hu, Yu-Pin Chen "Laser Coding on the Eggshell using Pulsed Laser Marking System", Journal of Materials Processing Technology, Vol. 209, pp. 737-744, 2009. (SCI) 
  45. Ming-Fei Chen, Yu-Sen Ho, Wen-Tse Hsiao, Kuo-Cheng Huang, Yu-Pin Chen, " Analysis of thermal effect on transparent conductive oxide thin films ablated by UV laser", Thin Solid Films, Vol. 518, pp.1067-1071. (SCI)
  46. Ming-Fei Chen, Wen-Tse Hsiao, Yu-Sen Ho, Shih-Feng Tseng, Yu-Pin Chen, " Laser patterning with beam shaping on indium tin oxide thin films of glass/plastic substrate", Thin Solid Films, Vol. 518, pp.1072-1078.(SCI)
  47. Yan-Hsin Wang, Wei-Li Chen, Ming-Fei Chen,"Characterization of InN epilayers grown on Si(1 1 1) substrates at various temperatures by MBE",Physica E:Low-dimensional System and Nanostructrues, Vol. 41, Issue 10, October, pp.1746-1751 , 2009. (SCI)
  48. Ming-Fei Chen, Yu-Pin Chen, Wen-Tse Hsiao, Shi-Yuan Wu, Chun-Wei Hu, Zhi-Peng Gu, "A scribing laser marking system using DSP controller", Optics and Lasers in Engineering, Vol. 46, pp.410-418, 2008. (SCI)
  49. Ming-Fei Chen, I-Feng Li, Chun-Wei Hu, "The Driver Circuit and Focusing Lens Designed for the Laser Range-Finder", Key Engineering Materials, Vol. 364-366, pp.160-165, 2008. (EI)
  50. Ming-Fei Chen, Yu-Pin Chen, Chun-Wei Hu and Chien-Chiuan Chen, "Method of Analyzing the singlet F-theta scan lens for laser drilling system", Key Engineering Materials, Vol. 364-366, pp.521-526, 2008. (EI)
  51. Ming-Fei Chen, Yu-Pin Chen, Wen-Tse Hsiao and Zhi-Peng Gu,"Laser patterning indium tin oxide thin film on glass substrate", Key Engineering Materials, Vol. 364-366, pp. 315-320, 2008. (EI)
  52. Ming-Fei Chen, Yu-Pin Chen, Wen-Tse Hsiao, "A surface compensation method for positioning errors in high-precision XY tables", JSME International Journal – Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 1, No. 4, 2007 (SCI)
  53. Ming-Fei Chen, Yu-Pin Chen, Wen-Tse Hsiao, Zhi-Peng Gu, "Laser direct write patterning technique of indium tin oxide film", Thin Solid Films, Vol. 515, pp.8515-8518, 2007. (SCI)
  54. Ming-Fei Chen, Yu-Pin Chen, "Compensating technique of field distorting error for the CO2 laser galvanometric scanning drilling machines", International Journal of Machine Tools and Manufacture, vol. 47, pp.1114-1124, 2007. (SCI)
  55. Chen Ming-Fei, Hsiao Wen-Tse , Hu Chun-Wei, "Study on CAD/CAM Technology Applied for CO2 Laser Processing System", Advanced Design and Manufacturing for Sustainable Development. Australia and its State of New South Wales. Vol. 3, pp.525-528, 2006. (EI)
  56. Ming-Fei Chen, Yu-Ting Lin, "Static behaviors and dynamic stability analysis of grooved rectangular aerostatic thrust bearings by modified resistance network method ", Tribology International, Vol. 35, pp.329-338, 2002 (SCI)
  57. Ming-Fei Chen, Yu-Pin Chen, Chen De. Lin, "Research on the Arc Type Aerostatic Bearing for a PCB Drilling Station", Tribology International, Vol. 35, pp.235-243, 2002 (SCI)
  58. Ming-Fei Chen, Yu-Ting Lin, "Dynamic Analysis of the X-shaped Groove Aerostatic Bearings With Disk-Spring Compensator", JSME International Journal, Series C, Vol. 45, No. 2, pp.492-501, 2002 (SCI)
  59. Ming-Fei Chen, Yu-Ting Lin, "Aerodynamic Effect of Grooved Rectangular Aerostatic Bearing on a Slideway", Journal of the Chinese Society of Mechanical Engineers, 2002, Vol.23, No.5, pp.459-466, 2002 (EI)
  60. M.F.Chen, C.B. Lee, "Performance Analysis of a Pressure-Compensated Axial Piston Pump ", Journal of the Chinese Society of Mechanical Engineers, Vol. 12, No.5,1991(EI)